Home › Guides › Lux contour plans

What is a lux contour plan?

What a lux contour plan or lux plot shows, how it is produced, what councils look for, and how to read one.

By Alkesh Gorsia CEng MIET, ILP registered · Updated November 2026

A lux contour plan, also called a lux plot or isolux drawing, is a site plan with lines joining points of equal light level, a bit like the contour lines on a map. It is the single most useful drawing in a lighting assessment, because it shows at a glance where light falls and where it doesn't.

What is lux?

Lux is the unit of illuminance: how much light falls on a surface. For a sense of scale:

  • Bright summer sunshine: around 100,000 lux
  • A well-lit office desk: around 500 lux
  • A typical car park: a few lux to around 20 lux
  • Full moonlight: well under 1 lux

For planning, the most important numbers are often the small ones: whether light at the boundary, at a neighbour's window or on a hedgerow is close to zero.

What a good lux contour plan shows

  • The site boundary and neighbouring buildings
  • Every light fitting, labelled to match the luminaire schedule
  • Contour lines at useful levels, often from 0.5 lux up to the design level
  • Light levels at the boundary and at sensitive features
  • For bat schemes, light levels on vertical surfaces such as hedgerows and roost entrances
  • A key, scale and north point

Get an instant fixed price using LuxQuotesAnswer a few questions and see your fixed price in about a minute.

Get my fixed price

How it is produced

The site is modelled in lighting design software using the real photometric data for each fitting: how much light it gives out and in which directions. Mounting heights, tilts, shields and a maintenance factor are included. The software then calculates light levels on a grid across the site and draws the contours.

The quality of the result depends on using the right fittings and realistic settings. A plan made with generic fittings, or with light only calculated inside the site, won't satisfy a careful case officer.

How councils use it

Officers use the lux contour plan to check three things: that light stays within the site, that neighbours won't be affected, and that any dark corridors asked for by the ecologist really are dark. It is also the drawing they'll attach to the approval, so it needs to be clear.

Every LuxQuotes assessment includes a lux contour plan. Get an instant fixed price using LuxQuotes.

Frequently asked questions

What's the difference between a lux plot and a lux contour plan?

They are the same thing. Some people also call it an isolux plan, light spill plan or lighting calculation drawing.

Can you add lux contours to my CAD drawing?

Yes. We can provide the contours as a PDF overlay on your site plan, and as a CAD layer on request.

What software do you use?

We use professional lighting design software with manufacturer photometric data for the actual fittings proposed, so the results match what will be installed.

Get an instant fixed price using LuxQuotesAnswer a few questions and see your fixed price in about a minute.

Get my fixed price